⎝⎛韦德足球⎞⎠

Related industry ⎝⎛韦德足球⎞⎠ releases
  • Your current location: ⎝⎛韦德足球⎞⎠ > Industry News > Common Problems >

  • 110 Network Alarm Operation Charge Standard Guide

    Release time: 2015-08-25 16:27

    Guide to Charge Standards for Networked Alarm Operations


    Abstract 】 Since the reform and opening up, with the rapid development of society and economy, more and more wealth, people are more and more concerned about the safety of people and property. Security has become a high-end service; therefore, alarm operators need to have a The charging standard for user installation services, according to the needs of different users, tailored a set of alarm systems for users, according to the charging standard, let users really feel that the money spent is value for money, it is really worth so much money Buy operator services.

    Guide to Charge Standards for Networked Alarm Operation Services

    For the novice operators who are new to the networked alarm operation industry, we need to let them understand how to use the 110 networked alarm system, understand the functions and characteristics of their systems, and let the novice operators become familiar with the networked alarm system in a short time. How to promote the installation of networked alarm systems for users, then we can increase the knowledge of networked alarm systems by novice operators through the following three aspects:


    (I) Functional Characteristics of Networked Alarm System

    The system mainly enters the fortified state, so when the defense zone triggers an alarm, it will immediately transmit the alarm signal to the nearby receiving center in the fastest way, and then the receiving center will analyze the situation and send it to the nearby area. The patrol personnel and the police team rush to the first scene at the fastest time. At the same time, the police station will notify the nearby police station or public security bureau. The police will also notify the user via SMS to immediately return to their home or shop. The rapid processing of the effects of the police situation, and the most effective method to ensure the safety of the lives and property of networked users, this is the biggest feature of the networked alarm system.

    (Two) 110 network alarm system architecture

    The architecture of the entire system is composed of the following parts: alarm host, inductive infrared detector, remote control, and siren alarm device; and the infrared detector is mainly used to detect the passage of the human body, and the door magnetic detection of the inductive detector The device is used to sense the opening and closing of doors and windows, the smoke detector is used to detect the concentration of smoke, the gas detector is used to specifically detect the concentration of ambient gas, and the emergency button is an emergency call for help when the user encounters an emergency danger state.

    (Three) working principle of 110 network alarm system

    110 network alarm system working principle diagram


    The user sets the armed state of the designated defense zone through the remote control. When the armed state encounters a criminal who illegally enters the defense zone and triggers the induction detector device, it is equivalent to triggering an alarm and the alarm signal will be transmitted to the alarm host. The high-pitched alarm is activated by the alarm host, and the user's mobile phone or the call center's phone number is automatically dialed at the same time, so that the police can get the fastest solution to avoid the user from losing important property.

    Network alarm operator charging problem

    As a networked alarm operator, the following three factors need to be considered when charging to users during the conversation process:

    (1) Considering the level of living and economic consumption of the local city in which it is located, different cities will have different fees and charges;

    (2) The 110 networked alarm system equipment installed by the user will be different, and the charges will also be different;

    (3) The corresponding security is different, the functions and effects are different, and the charges will be different.

    According to the three factors listed above, it depends on the situation of charging users. However, the operator knows that these three points are still not enough. We must also charge according to the network alarm method selected by the user. In the third article, the functions and security are different, and the charges will also be different. In fact, 110 network alarms have three types of network alarm methods, and are the most commonly installed alarm systems for many users, so now we come to understand the following three Network alarm mode:

    (I) Telephone line network alarm system

    This is the cheapest price, but the security performance is not so good, because the security of self-protection is poor, because the entire system uses telephone lines, and once the telephone line is damaged and cut, the entire system will be severely damaged. Nor can it be used normally;

    (Two) GPRS wireless network networking alarm system

    This type of network is mainly connected by mobile phone card traffic. The equipment cost of this method is relatively high, and the price is a little higher than that of telephone line networking.

    (3) Visual Networking Alarm System

    At the same time compatible with telephone networking and network networking, can also provide full-time recording 24 hours a day, the installation of visual network alarm is equivalent to installing a monitoring system or a traditional network alarm system, but this system is not good Is the highest price charged in three kinds

    For the above three networking alarm methods, operators can give different prices or acceptable alarm methods according to users, and then give the corresponding charging standard price.

    What is the fee

    Network alarm operators can refer to the following three points to measure their company's charging standards for users:

    (1) According to the area of the user's defense area

    The charging standard is determined according to the area of the defense area required by the user. The size of the defense area is related to the issue of whether the user is charged more or less.

    (Two) the alarm device installed in accordance with the needs of the user's zone

    The user has determined the area of the defense zone, and the user can be charged according to the size of the defense area. The so-called alarm device refers to infrared detectors, induction detectors, smoke detectors and gas detectors. The higher the number of detectors installed, the higher the fees will be, and the lower the number of detectors installed, the lower the fees will be.

    (3) According to the number of defense zones

    The user specifies the number of defense zones to be installed and fortified. The number of defense zones will increase, and the price of the charge will also have a certain impact. Relatively speaking, the number of defense zones increases, so the required alarm devices will also increase, and the defense zones of different sizes, The alarm devices that need to be installed will also vary.

    In addition to the above three points to measure the charging standards of your own alarm operating company, if users need to purchase insurance, they can collect additional insurance premiums, and charge users for insurance premiums. If the operator does not understand the insurance knowledge, here You can download the related "Insurance Property Basic Insurance Agreement" for free, and then familiarize yourself with it, and then give detailed instructions to users. The agreement can be downloaded for free at: http://pan.baidu.com/s/1c02QudU Password: yxsr.

    Network Alarm Charge Standard Template Free Download

    If the network alarm operator is still in a vague state of the above, then he can click on the free download link below to download the template, and the operator can also refer to the charging standards of this template to implement, free download link: http: / /pan.baidu.com/s/1ntzQhFN Password: i7h8

    like
    (5)
    83.3%
    Step on it
    (1)
    16.7%

    90% of people also read the following article

  • How about the infrared detection function of the burglar alarm system
    The function of the infrared detector needs to be used in the burglar alarm system, that is, it needs to be used with the alarm host in the burglar alarm system ... [View Details]
  • Network alarm system WeChat disarming function tutorial
    For many new and old users, I don't know how to use the WeChat arming and disarming function in the mobile APP, so here, I will explain the operation steps in detail to everyone ... [View Details]
  • The best choice of door-to-door anti-theft alarm
    When the alarm operator installs the alarm at the door, not only needs to consider whether the user is suitable for the requirements of anti-theft, but also needs to consider the installation location and the overall beauty and security ... [View Details]
  • Network alarm operation company service content
    The service content of the operating company mainly provides users with the most secure and high-quality networked alarm services, not only for security protection services, but also for users ... [View Details]
  • Voice King Alarm Host Programming Graphic Tutorial
    The network alarm operator does not understand how to program after purchasing the voice king alarm host. So provide free programming detailed tutorial download, programming instructions can help operators ... [View Details]
  • Physical store marketing planning implementation system solution
    The latest networked alarm system marketing plan in 2016, specifically to solve the problem of operators who have newly joined the networked alarm industry in the physical store to achieve greater profits in marketing, and ... [View Details]
  • Ranch Ranch
    韦德足球 欢乐拼三张 真人游戏平台注册 天天电玩城