The best place to install a burglar alarm
Choose the location where the burglar alarm is installed
The installation of any anti-theft alarm cannot be arbitrarily installed, because once installed, the surrounding environment may directly affect the installed anti-theft alarm. If the installation place is wrong, the alarm effect may not be good. Or the desired alarm effect cannot be achieved, and if it is improperly installed, it will then take unnecessary effort to disassemble and disassemble and cause aesthetic damage to the place after disassembly, so one-time installation is better than repeated installation. Be strong, so site selection is the first job before installation. Before selecting the site, the following anti-theft alarms need to be considered for a one-time installation:
(1) The alarm host must be installed in a place where there is a power line and a telephone line, and the mobile phone card will cause signal interference;
(2) The installation place must be convenient for wiring;
(3) Problems with signal reception, the alarm host is suitable to be installed in the center of all detectors;
(4) Away from the magnetic field of high-power appliances, anti-theft alarms are high-frequency transmitting electronic products and are easily affected by magnetic fields
Careful selection of burglar alarm equipment
Regarding the brand selection of the burglar alarm host, after selecting a suitable location, we next need to choose the appropriate product. For the selection of the burglar alarm host, everyone is currently paying attention to, and the host of quality assurance brought by famous brands, so choose The anti-theft alarm host can not only look at the appearance, but also the quality, but in addition to the selection of the alarm host, we also need to pay attention to pipeline problems. Here, we recommend that you choose the material of the pipeline, because the material of the pipeline can play an important role in the anti-theft alarm. For protection, many criminals like to focus on destroying anti-theft alarms from pipelines. At present, many alarm operators use PVC pipes or slots for anti-theft alarm devices. This is a big security risk. Therefore, in order to be more secure, To prevent criminals from taking advantage of it, we must choose a hard pipeline to increase the self-protection ability of the burglar alarm.
At present, criminals have also learned how to destroy the burglar alarm or pipeline and then enter the room. Therefore, the installation location of our burglar alarm and pipeline should not be too exposed, and it should have a deeper concealment, not easy to be found, so as not to be damaged. Destruction. In the past, we generally installed anti-theft alarms or pipelines in places that everyone can see, which are very obvious, in order to achieve the role of intimidating criminals, but now, if the anti-theft alarms or pipelines are too exposed Installation, the effect that the user wants will be reversed. Not only does it have no intimidation effect, but the anti-theft alarm is damaged, the pipeline is pinched, etc., and it is necessary to re-purchase the installation. Therefore, in order to avoid such things, The method is concealed installation, which can prevent damage and create a priority condition for alarm recording. If the user's building is constructed with the need to install an anti-theft alarm, the user's concealment of the pipeline may not need to be carried out. Secondary construction; and also need to consider the pre-buried protective tube can be convenient Flexible connections to backbone bridge, so that each path in the sheath tube preamplifier cable of a small diameter.
Copyright © 2002-2020
Shenzhen Lion King Technology Co., Ltd.-All rights reserved
Guangdong ICP No. 08114571
Service Hotline: 400-0506-110